Wet Waste Vertical Compaction
Use these products for weekly volumes of less than 150 cubic yards of uncompacted wet or dry/ general waste materials.
Easy to Operate
(1)Key unlocks feed door. (2)Dump wet or general waste materials into the feed area. (3)Close the door to start the compaction cycle automatically. The VIP or JP-6 crushes the refuse with more than 13 tons of force. (4)The crushing ram automatically stops at mid-point creating a positive seal.
The new Untouchable VIP is a modified version of the Vert-I-Pack®. The Untouchable VIP was specially designed for the narrow alleys of Chicago. With the power unit is on the side, the Untouchable VIP is ideal for applications where space is limited and access to the rear of the unit is difficult.
Mark-Costello’s Vert-I-Pack® (VIP) and Jet Pak (JP-6) compactors are ideally suited when available space for a compaction system is limited, the volume of wet waste does not justify a larger system, and a roll-off collection service is not available. These units are great for shopping plazas, restaurants, cafeterias, fast food locations, hospitals, nursing homes, schools, and much, much more.
The compact design of the VIP FL/3 Portable Packer allows it to be used inside a building. The compaction container can then be rolled to a truck accessible area.
Features & Benefits
Each unit is totally UL Listed to assure quality and maintains the highest industry standards
- The container stops on the VIP can be easily changed from front to back to convert the unit to a front or rear feed application.
- The VIP also has telescoping legs that allow it to accommodate a 4, 6 or 8 cubic yard container. This means one unit can be used for a variety of applications.
- Packing ram maintains pressure against the refuse when the unit is not being used. This eliminates refuse “spring-back” and windblown litter.
- 48″ high liquid retention level.
- Feed door automatically locks to prevent unauthorized use of the compactor.
- The VIP can be fed from inside a building with a security chute for controlled access.
- The VIP & JP-6 save on installation cost by requiring only 120 volts, a 20 amp outlet, and can be placed on any reasonably level surface.
Also see Mark-Costello’s PAK’NTAINER® – Self-Contained Compactor/Container
The compact design of the Pak’ntainer makes it ideal for installations where space is limited. It can be easily relocated or installed with a through-the-wall chute feed system for continuous feed and security. It also features Mark-Costello’s patented CYCON Life-Xtender-cyclic control system.
This self-contained unit is well suited for wet waste generators such as restaurants and cafeterias. The fluid remains in the container and not on the ground. This helps to control rodents and odor.
Pick-ups are made by typical front or rear loader collection vehicles.
“We have been very pleased with the performance and the cost savings that the trash compactors from The Mark-Costello Company have provided to our school district.”
Jim Mitroff
Facilities Manager
San Diegutio School District
“It’s been a great relationship with The Mark-Costello Company; they are very dependable to all of our waste handling requirements and have made us aware of the importance of recycling and the upcoming waste handling issues in the future.”
Jim Poltl
Executive Director of Maintenance
San Marcos Unified School District
Vert-I-Pack® – VIP
Model | Container Capacities | *** Charge Box Capacity | Feed Opening | System Pres- Norm. | System Pres – Max. | Force Rate- Norm | Force Rate – Max | Motor | Cycle Time | **** Weight |
* Front Feed VIP | 3, 4, 6 & 8 cy. | 0.54 cy. | 26″x46″ | 2,100 psi | 2,400 psi | 26,400 lbs. | 30,200 lbs. | 3 hp | 29 sec. | 3805 lbs. |
** Rear Feed VIP | 4, 6 & 8 cy. | 0.54 cy. | 26″x46″ | 2,100 psi | 2,400 psi | 26,400 lbs. | 30,200 lbs. | 3 hp | 29 sec. | 4145 lbs. |
* Side Feed VIP | 3, 6 & 8 cy. | 0.54 cy. | 26″x46″ | 2,100 psi | 2,400 psi | 26,400 lbs. | 30,200 lbs. | 3 hp | 29 sec. | 4290 lbs. |
** Front Feed VIP | 4 cy. | 0.54 cy. | 26″x46″ | 2,100 psi | 2,400 psi | 26,400 lbs. | 30,200 lbs. | 3 hp | 29 sec. | 3827 lbs. |
** Rear Feed VIP | 4 cy. | 0.54 cy. | 26″x46″ | 2,100 psi | 2,400 psi | 26,400 lbs. | 30,200 lbs. | 3 hp | 29 sec. | 3626 lbs. |
VIP FL/3 | 3 cy. | 0.54 cy. | 26″x46″ | 2,100 psi | 2,400 psi | 26,400 lbs. | 30,200 lbs. | 3 hp | 29 sec. | 3375 lbs. |
JP-6 | 6 cy. | 0.54 cy. | 26″x46″ | 2,100 psi | 2,400 psi | 26,400 lbs. | 30,200 lbs. | 3 hp | 29 sec. | 3050 lbs. |
* ** *** **** | For front loader collection trucks For rear loader collection trucks WASTEC Rating. Weight for largest capacity unit. Other weights vary according to container capacity. All models available can be customized to virtually any width, length or height. |
Untouchable VIP
Container Capacities | Charge Box Capacity | Feed Opening | System Pres- Norm. | System Pres – Max. | Force Rate- Norm | Force Rate – Max | Motor | Cycle Time | **** Weight | |
Untouchable VIP | 3 cy. | 0.72 cy. | 26″x46″ | 2,100 psi | 2,400 psi | 26,400 lbs. | 30,200 lbs. | 3 hp | 29 sec. | 3675 lbs. |
Pak’ntainer® – MPT
Model | Base Size Mfrg. Rating | Feed Opening | System Pres- Max. | Force Rate -Norm | Force Rate.- Max | Motor | Cycle Time | Total Weight | Lifting Weight | |
MPT (all models) | 0.5 cy. | 22.5″ L x 46″ W | 2,400 psi | 19,800 lbs. | 19,800 lbs. | 3 hp | 28 sec | 2,800 lbs. | 2,500 lbs. |