Wet Waste Vertical Compaction

Use these products for weekly
volumes of less than 150 cubic yards of uncompacted wet or dry/ general
waste materials.
[ Specifications ]
Easy
to Operate:
(1) Key unlocks feed door. (2) Dump wet or general waste materials into
the feed area. (3) Close the door to
start the compaction cycle automatically. The VIP or JP-6 crushes the refuse
with more than 13 tons of force. (4)
The crushing ram automatically stops at mid-point creating a positive seal.


The
new Untouchable VIP is a modified version of the Vert-I-Pack®.
The Untouchable VIP was specially designed for the narrow alleys of Chicago.
With the power unit is on the side, the Untouchable VIP is ideal for applications
where space is limited and access to the rear of the unit is difficult.
[specifications] |
Mark-Costello's Vert-I-Pack®
(VIP) and Jet Pak (JP-6) compactors are ideally suited when available
space for a compaction system is limited, the volume of wet waste does not
justify a larger system, and a roll-off collection service is not available.
These units are great for shopping plazas, restaurants, cafeterias, fast
food locations, hospitals, nursing homes, schools, and much, much more.

The compact design of the VIP FL/3 Portable Packer allows it to be
used inside a building. The compaction container can then be rolled to a
truck accessible area.
Features
& Benefits:

Each unit is totally
UL Listed to assure quality and maintains the highest industry standards.
The container stops on
the VIP can be easily changed from front to back to convert the unit to
a front or rear feed application.
The VIP also has telescoping
legs that allow it to accommodate a 4, 6 or 8 cubic yard container. This
means one unit can be used for a variety of applications.
Packing ram maintains pressure
against the refuse when the unit is not being used. This eliminates refuse
"spring-back" and windblown litter.
48" high liquid retention
level.
Feed door automatically
locks to prevent unauthorized use of the compactor.
The VIP can be fed from
inside a building with a security chute for controlled access.
The VIP & JP-6 save
on installation cost by requiring only 120 volts, a 20 amp outlet, and can
be placed on any reasonably level surface.
|