Mark-Costello's BlokPak 3000®:
the Ultimate in High Volume
Transfer Station Compactor
Mark-Costello's BlokPak® 3000
Transfer Systemis another innovative product for high volume
processing of municipal solid waste for transfer to the landfill. The
powerful compaction force produces maximum payloads at an affordable price.
The system compacts waste against a gate in a compaction chamber forming
8-10 foot long logs. The logs are then ejected into a transfer trailer.
After the trailer is full, the waste can continue to be processed waste
while changing trailers saving valuable time.
Here's How the BlokPak® 3000
Transfer Station Compactor Works:
The
BlokPak® 3000 can be installed in
existing over-the-top transfer station
facilities. At these facilities, the compactor
is fed with a front-end loader off of a tipping
floor. It can also be configured for conveyor
feed or direct dump applications.
The refuse is fed into the large 100"L x 80"W
x 82" D
clear top (feed) opening. The packing ram
compresses the waste into the compaction chamber
against a vertical steel gate.
The gate remains
closed while the ram is cycling forming a dense
log of refuse. When the desired log length has
been reached, the vertical
gate raises and the ram pushes the log into the
transfer trailer.
Once the trailer has reached maximum payload,
the trailer is replaced with an empty trailer. The ram penetrates into the trailer 60" (5 ft.). This is assures a clean break-a-way when the
trailer is full. Since the
gate is closed, the BlokPak® 3000
can continue to cycle and process waste while
the trailer is being replaced to ensure quick
turnaround times.
The
BlokPak® 3000 is capable of processing
more than 90 tons per hour (continuous). It fits
nicely into existing transfer station facilities
or for new construction with minimal site
preparation.
RELATED
Read some of the recent stories about
Mark-Costello's Transfer Systems:
The
BlokPak® 3000 can be installed in
existing over-the-top transfer station
facilities. At these facilities, the compactor
is fed with a front-end loader off of a tipping
floor. It can also be configured for conveyor
feed or direct dump applications.
The refuse is fed into the large 100"L x 80"W
x 82" D
clear top (feed) opening. The packing ram
compresses the waste into the compaction chamber
against a vertical steel gate.
The gate remains
closed while the ram is cycling forming a dense
log of refuse. When the desired log length has
been reached, the vertical
gate raises and the ram pushes the log into the
transfer trailer.
Once the trailer has reached maximum payload,
the trailer is replaced with an empty trailer. The ram penetrates into the trailer 60" (5 ft.). This is assures a clean break-a-way when the
trailer is full. Since the
gate is closed, the BlokPak® 3000
can continue to cycle and process waste while
the trailer
is being replaced to ensure quick
turnaround times.