MEH20 20,000 lb. Hook-Lift Hoist
 

Dimensional Specifications

A
*Max. Hoist Height Above Truck Frame Loading & Unloading 127" 3226mm
B
*Max. Hoist Height Above Truck Frame Dumping 148" 3759mm
C
Cab to Hoist 3" 76mm
D
Raised Angle 53o with 14' Container
Raised Angle 45o with 16' Container
E
Cab to Axle 126" to 144" 3200mm - 3658mm
F
Cab to Aft Frame 180" 4572mm
G
Base Container to Hook Point 53 15/16" 1370mm
Hoist Length 163 3/8" 4150mm
Rated Capacity 20,000 lbs. 9072kg
Lift Cylinders 5" x 3" x 58" 127 x 76 x 1473mm
Jib Cylinder 5" x 1 1/2" x 18" 127 x 38 x 457mm
Approximate Weight 3400 lbs. 1542kg

Cycle Times

Lift Cylinder      
Extending Dump: 32 sec. Retracting Dump: 21 sec.
Jib Cylinder      
Extending Dump: 3 sec. Retracting Dump: 2 sec.
 
Minimum Truck Specs
Front Axle: 8,000 lbs. with power steering
Rear Axle: 18,000 lbs.
Total Bending Moment: 1,548,000 in-lb.
36,000 psi Chassis Frame: Minimum section modulus=21.5in3
50,000 psi Chassis Frame: Minimum section modulus=15.5in3

Specifications

Capacity: 20,000 lbs.
Container Lengths: 14'-16'
Frame & Boom: Heavy Duty with T-1 Top and Bottom
Lift Cylinders: (2) 5" bore x 3" rod x 58" stroke with Built-in Dual Counterbalance Valves
Jib Cylinder: 3" bore x 1 1/2" rod x 18" stroke
Pivot Tube: 4 1/2" O.D. 3/4 wall with bushings
Pivot Hook: A514 T-1 100,000psi yield
Lift Cylinder Pins: 2 1/2"
Hinge Shaft: 2 1/2" with Outboard Supported Upper Lift Shafts
Rear Hold Down: 3/4" plate
Operating Pressure: 3500 psi
Hydraulic Pump: Direct Mount, 18.3 gpm @ 1500 rpm
Hydraulic Valve: 2 Spool Sectional Valve with built-in relief
Oil Reservoir: 17 gal. with 10 Micron Air Breather 10 Micron In-tank Return Filter
Suction Screen: 100 Mesh
Working Points: Greaseable
Continuous Rail: 18" above Truck Frame
Controls: In Cab Operation


Top of Page
 


THE MARK-COSTELLO CO.
1145 East Dominguez Street
Carson, California 90746 USA
(310) 637-1851 Phone  |  (310) 762-2330 FAX
Contact Us

All contents © Copyright 2009. All rights reserved.  Sitemap | Terms of Use | Privacy Policy
Last Updated Monday, January 18, 2010 | Web Services by Ron Castle Webs