ATLAS® Non-Ferrous Baler

ATLAS® Non-Ferrous Baler

Atlas NonFerrous BalerFacilities baling from one to three tons of aluminum and steel cans, aluminum and copper wire, aluminum siding, extrusion, radiators, etc. are Replaceable Body Shear Bladereaping big benefits from the new ATLAS. The heavy constructed frame, perfect for the scrap industry, along with “Stress Engineered Construction” for superior size to weight ratio and a high efficiency power unit allows the ATLAS to perform at optimum efficiency. Specially designed bolt-on and replaceable body and ram shear blades provide maximum performance and ease of maintenance, which eliminates precutting of most materials. The ATLAS produces heavier, more dense, labor saving bales which equals more savings for you, and don’t forget the affordable price!
 

 

  • Bales a variety of materials
  • Replaceable body and ram shear bars
  • Produces a 30″ x 48″ x 60″ size bale
  • Full Penetration ram for maximum compaction that fully ejects the bales
  • Unique wire guides for quick and easy ties and clean-out
  • Dual interlock on bale chamber door
  • Programmable, UL listed, controller permits automatic or manual operation
  • Lower photocell control
  • Backed by Mark-Costello’s extensive baler warranty
  • Wire guides and tie-through bale chamber door
  • High efficiency power unit
  • Totally enclosed, fan-cooled (TEFC) motor for worry-free, efficient operation
  • Hopper with access door with interlock
  • Advanced Structural Engineering & Construction for superior size to weight ratio.
  • Electrical disconnect

Structural Dimensions: ATLAS

Structural Dimensions: ATLAS
Overall Dimensions 22′-10″ L x 7′-0″ W x 6′-8″ H (hopper) (6960mm x 2134mm x 2032mm)
Charge Box 45″ L x 60″ W x 29″ H (1143mm x 1524mm x 7366mm)
Clear Top Opening 45″ L x 56″ W (1143mm x 1422mm)
Body 1/4″ sides with 3/8″ T1 liners; 3/8″ floor with 3/8″ T1 liner; 1/2″ T1 tongue & groove floor
Ram 1/2″ top; 3/4″ face; 1/2″ bottom with 3/8″ T1 liner; 1/2″ T1 tongue & groove
Body & Ram Shear Blades A514 steel, bolt-on
Baler Weight 12.5 Ton
Hydraulic/Electronics
Power Pack Motor 40 HP
Pump (Vane Type) 75 GPM
Oil Reservoir Volume 150 Gal
Cylinder Type 9″ bore X 6″ rod
Cylinder Stroke 96″
Performance Data
Max. System Pressure 3000 psi.
Max. Force 190,000 lbs.
Max. Platen Pressure 109 psi
Cycle Time 22 seconds (at partial penetration)

Structural Dimensions: ATLAS ET

Structural Dimensions: ATLAS ET
Overall Dimensions 22′-10″ L x 7′-0″ W x 6′-8″ H (hopper) (6960mm x 2134mm x 2032mm)
Charge Box 45″ L x 60″ W x 29″ H (1143mm x 1524mm x 7366mm)
Clear Top Opening 45″ L x 56″ W (1143mm x 1422mm)
Body 1/4″ sides with 3/8″ T1 liners; 3/8″ floor with 3/8″ T1 liner; 1/2″ T1 tongue & groove floor
Ram 1/2″ top; 3/4″ face; 1/2″ bottom with 3/8″ T1 liner; 1/2″ T1 tongue & groove
Body & Ram Shear Blades S7 Steel, bolt-on/replaceable
Baler Weight 14.5 Ton
Hydraulic/Electronics:
Power Pack Motor 50 HP
Pump (Vane Type) 94 GPM
Oil Reservoir Volume 200 Gal
Cylinder Type 10″ bore X 7″ rod x 96″ stroke
Volume Displacement 7414 ft3/hr
Performance Data
Max. System Pressure 3000 psi.
Max. Force 190,000 lbs.
Max. Platen Pressure 109 psi
Cycle Time (empty)
Strokes per Minute (empty)
22 seconds (at partial penetration)
2.7