 |
 |
 |
 |
RELATED
|
RELATED |
|
Container Fullness Measuring Systems |
|
|
|
Container Usage Measuring Systems |
|
|
|
Cycle Control Systems |
|
|
|
Odor Control Systems |
|
|
|
Power Pack Options |
|
|
|
Steel Options |
|
|
| |
|
 |
 |
|
|
|
|
Container Fullness Measuring Systems |
|
|
|
TrashMinder Container Fullness Measuring System |
 |
|
TrashMinder®
is the most advanced system available for measuring and reporting container
fullness. It also controls and reports container usage. Several models are
available, all with special features. Fullness TrashMinder models will send a
signal to a fax, pager or computer when containers are full. From one computer,
TrashMinder can manage up to 4000 compactors (each with a TrashMinder monitor)!
The software generates a range of reports which display compactor status or
usage information. The Usage TrashMinder models allow control of compactor
access. From a computer, accounts can be added or deleted. On-site, users simply
input an ID number or insert a magnetic strip ID card to access the compactor.
Click here to visit the TrashMinder® web page
for more information
|
|
Trash Manager |
 |
|
The Trash Manager
optimizes compactor performance thereby paying significant dividends to the
customer interested in recycling or offsetting increasing disposal fees. The
Trash Manager System causes the full force of the compactor to be exerted for up
to one minute. Conventional systems use a pressure switch which is activated by
a pressure spike causing the unit to shutdown and signal a full container,
therefore, the refuse is subjected to the true compaction force of the machine
for only a very brief moment. To take full advantage of this method of
compaction, the Trash Manager includes a set of four indicator lights signaling
when the container is approximately 70, 80, 90, and 100% full. To eliminate
pressure spikes, the sensors read the hydraulic "back pressure" exerted by the
compressed refuse against the face of the ram after the ram has ceased its
forward motion. A remote indicator light station is available for installation
in, for example, the manager's office for enhanced cost control.
Available for factory installation only. All remote controls are
contained in NEMA 13 enclosure and connected to power pack with 13' of Sealtite. |
|
Full Container Light |
 |
|
The Full Container Light
is activated when the normal shutdown pressure has been reached. On
achieving shutdown pressure, the compactor will automatically stop and the Full
Container Light, which is built into the remote push button station, will turn
on. To reactivate the compactor for normal operation, it is necessary to empty
the container and depress the lens cover which deactivates the Full Container
Light circuit. |
|
Pressure Gauges |
 |
|
The Pressure Gauge is
fluid filled and is furnished with 15' of hydraulic hose so that it can be
mounted adjacent to the packer's push-button control station or mounted on the
power pack if remote pack is selected. It reflects the packer's system pressure
and enables the operator to determine when the container is approaching its
"packed out" state. Also available is a Dual Needle Pressure Gauge for
easier readings. |
Container Usage
Measuring Systems |
|
Keymaster Meter System |
 |
|
The Advanced Control System -
The Mark-Costello Keymaster Meter System provides controlled compactor
use for security and accountability. Compactor can be operated only be means of
individual, bonded keys. Each key activates its own meter which electronically
registers the keyholder's use of compac |
Top of Page
Option Pages: [<<
previous page] 1 |
2
| 3 | 4 |
5 [next page >>
] |
