|
|
|
Wet Waste Vertical Compaction
|
|

Use these products for weekly
volumes of less than 150 cubic yards of uncompacted wet or dry/ general waste
materials.
Easy to Operate
(1) Key unlocks feed door.
(2) Dump wet or general waste materials into the
feed area. (3) Close the door to start the
compaction cycle automatically. The VIP or JP-6 crushes the refuse with more
than 13 tons of force. (4)
The crushing ram automatically stops at mid-point creating a positive seal.


 The
new Untouchable VIP is a modified version of the Vert-I-Pack®. The
Untouchable VIP was specially designed for the narrow alleys of Chicago. With
the power unit is on the side, the Untouchable VIP is ideal for applications
where space is limited and access to the rear of the unit is difficult.
[
Specifications ]
|
Mark-Costello's Vert-I-Pack® (VIP) and Jet Pak (JP-6) compactors
are ideally suited when available space for a compaction system is limited, the
volume of wet waste does not justify a larger system, and a roll-off collection
service is not available. These units are great for shopping plazas,
restaurants, cafeterias, fast food locations, hospitals, nursing homes, schools,
and much, much more.

The compact design of the VIP FL/3 Portable Packer allows it to be used
inside a building. The compaction container can then be rolled to a truck
accessible area.
Features
& Benefits
 |
Each unit is totally UL
Listed to assure quality and maintains the highest industry standards. |
 |
The container stops on the VIP
can be easily changed from front to back to convert the unit to a front or rear
feed application.
|
 |
The VIP also has telescoping
legs that allow it to accommodate a 4, 6 or 8 cubic yard container. This means
one unit can be used for a variety of applications.
|
 |
Packing ram maintains pressure
against the refuse when the unit is not being used. This eliminates refuse
"spring-back" and windblown litter.
|
 |
48" high liquid retention
level.
|
 |
Feed door automatically locks
to prevent unauthorized use of the compactor.
|
 |
The VIP can be fed from inside
a building with a security chute for controlled access.
|
 |
The VIP & JP-6 save on
installation cost by requiring only 120 volts, a 20 amp outlet, and can be
placed on any reasonably level surface. |
[ Specifications ]
|
|
Also see Mark-Costello's
PAK'NTAINER® - Self-Contained Compactor/Container
|

 |
The
compact design of the Pak'ntainer makes it ideal for installations where space is limited. It can be easily
relocated or installed with a through-the-wall chute feed system for continuous
feed and security. It also features Mark-Costello's patented CYCON Life-Xtender-cyclic
control system.
This self-contained unit is well suited for wet waste generators such as
restaurants and cafeterias. The fluid remains in the container and not on the
ground. This helps to control rodents and odor.
Pick-ups are made by typical front or rear loader collection vehicles.
[ Specifications
] |
“We have been very
pleased with the performance and the cost savings that the trash compactors from
The Mark-Costello Company have provided to our school district.”
Jim Mitroff
Facilities Manager
San Diegutio School District
“It’s been a great relationship with The Mark-Costello Company; they are very
dependable to all of our waste handling requirements and have made us aware of
the importance of recycling and the upcoming waste handling issues in the
future.”
Jim Poltl
Executive Director of Maintenance
San Marcos Unified School District |
|
Vert-I-Pack® - VIP |
|
Model |
Container Capacities |
*** Charge Box Capacity |
Feed Opening |
System Pres- Norm. |
System Pres - Max. |
Force Rate- Norm |
Force Rate - Max |
Motor |
Cycle Time |
**** Weight |
|
* Front Feed VIP |
3, 4, 6 & 8 cy. |
0.54 cy. |
26"x46" |
2,100 psi |
2,400 psi |
26,400 lbs. |
30,200 lbs. |
3 hp |
29 sec. |
3805 lbs. |
|
** Rear Feed VIP |
4, 6 & 8 cy. |
0.54 cy. |
26"x46" |
2,100 psi |
2,400 psi |
26,400 lbs. |
30,200 lbs. |
3 hp |
29 sec. |
4145 lbs. |
|
* Side Feed VIP |
3, 6 & 8 cy. |
0.54 cy. |
26"x46" |
2,100 psi |
2,400 psi |
26,400 lbs. |
30,200 lbs. |
3 hp |
29 sec. |
4290 lbs. |
|
** Front Feed VIP |
4 cy. |
0.54 cy. |
26"x46" |
2,100 psi |
2,400 psi |
26,400 lbs. |
30,200 lbs. |
3 hp |
29 sec. |
3827 lbs. |
|
** Rear Feed VIP |
4 cy. |
0.54 cy. |
26"x46" |
2,100 psi |
2,400 psi |
26,400 lbs. |
30,200 lbs. |
3 hp |
29 sec. |
3626 lbs. |
|
VIP FL/3 |
3 cy. |
0.54 cy. |
26"x46" |
2,100 psi |
2,400 psi |
26,400 lbs. |
30,200 lbs. |
3 hp |
29 sec. |
3375 lbs. |
|
JP-6 |
6 cy. |
0.54 cy. |
26"x46" |
2,100 psi |
2,400 psi |
26,400 lbs. |
30,200 lbs. |
3 hp |
29 sec. |
3050 lbs. |
|
*
**
***
**** |
For front loader
collection trucks
For rear loader collection trucks
WASTEC Rating.
Weight for largest capacity unit. Other weights vary according to container
capacity.
All models available can be customized to virtually any width, length or height. |
|
Untouchable VIP |
| |
Container
Capacities |
Charge Box
Capacity |
Feed Opening |
System Pres-
Norm. |
System Pres -
Max. |
Force Rate-
Norm |
Force Rate -
Max |
Motor |
Cycle Time |
**** Weight |
|
Untouchable VIP |
3
cy. |
0.72 cy. |
26"x46" |
2,100 psi |
2,400 psi |
26,400 lbs. |
30,200 lbs. |
3
hp |
29
sec. |
3675 lbs. |
|
 |
|
Pak'ntainer® - MPT |
| Model |
Base Size Mfrg. Rating |
Feed Opening |
System Pres- Max. |
Force Rate -Norm |
Force Rate.- Max |
Motor |
Cycle Time |
Total Weight |
Lifting Weight |
|
MPT
(all models) |
0.5 cy. |
22.5" L x 46"
W |
2,400 psi |
19,800 lbs. |
19,800 lbs. |
3 hp |
28 sec |
2,800 lbs. |
2,500 lbs. |
|
|
Top of Page
|
|