  |
[
Specifications
| Steel & Operational
Options ]
 |
Heavy Duty Commercial Compactor...
The large 59 1/2"W x 67 1/2"L
clear top opening and superior strength of the RJ-325HD make it just right for
large volumes of crates, skids, and other hard-to-compact industrial refuse and
trash. Waste is crushed to a fraction of their original bulk!
Superior Engineering...
Mark-Costello's RJ-325HD is
engineered with extra steel to meet the demands of heavy-duty industrial use.
Cylinder supports, 1" thick breaker bar, 3/8" ram top and extra side supports
are added for superior endurance. Also standard on the RJ-325HD are 1/4" thick
steel charge box liners and 1/2" thick abrasion resistant steel plate on the
charge box floor.
Ram Guide System
The packing ram is supported by
specially formulated cast iron shoes which ride on replaceable wear strips. This
exclusive design protects the charge box floor from the full force of the
packing ram, extending its life and dramatically reducing compaction-robbing
friction.

Mark-Costello's RamJet 325 Compactors are Totally UL Listed!
|
Side-Mount Power Unit
 Mark-Costello's Side-Mounted
Power Unit, the first in the industry, offers the convenience and
ease-of-maintenance of a remote power pack with the space savings of an
integrated power pack. This new configuration eliminates ALL electrical
components inside the compactor.
The Pump on Mark-Costello's high performance Side-Mounted Power Unit is
secured to a "C" flange TEFC motor with a machined bracket that guarantees
coupling alignment. The Limit Switch and all other parts of the power unit are
easily accessible for ease-of-maintenance. The Reset Button for the Motor
Starter is also located on the outside which eliminates entry into the control
box.
Advanced Control System
The RJ-325HD features an
advanced, simplified control system with 2 button operation. It is key-operated
and fully automatic. The heavy duty push button controls are contained in a
weatherproof NEMA 13 enclosure. Connected to the power pack with 13' of
sealtite, the controls can be located for operator convenience. |
|
Structural Dimensions |
-
Side-Mount Power Unit
-
Power Unit Weather Cover
-
Control Panel Box
-
Motor Starter Reset Button
-
Limit Switch
-
Ram
-
Ram Guide Shoes with Replaceable Wear Strips
|
|
A |
B |
C |
D |
E |
*F |
*G |
*H |
I |
J |
K |
L |
M |
N |
O |
P |
Q |
|
173 3/4" |
78" |
48 9/16" |
69 1/8" |
60" |
75" |
160 3/4" |
6 1/2" |
31 1/2" |
9" |
102 7/8" |
70 7/8" |
39 7/16" |
9" |
38 1/2" |
14 3/4" |
5" |
|
3035 mm |
1981 mm |
1233 mm |
1756 mm |
1524 mm |
1905 mm |
2705 mm |
165 mm |
800 mm |
229 mm |
1873 mm |
1162 mm |
1002 mm |
229 mm |
978 mm |
375 mm |
127 mm |
* At Bolt
Centers (reference dimensions only)
|
| Charge
Box Capacity |
|
|
|
[Mfrs. Rating] |
3.15 cy |
2.41 m3 |
| [WASTEC Rating] |
2.53 cy |
1.93 m3 |
|
Clear Top Opening |
67.5" X 59
1/2" |
1715mm x
1511mm |
|
Performance Data |
| Cycle Time |
50 s |
50 s |
|
Total Normal Force |
46,700 lb |
208 kN |
| Total Maximum Force |
55,100 lb |
245 kN |
|
Normal Ram Face Pressure |
27.1 psi |
187 kPa |
| Maximum Ram Face
Pressure |
31.9 psi |
220 kPa |
|
Ram Penetration |
13" |
330 mm |
|
Electrical Equipment |
| Electrical Motor
3/60-208/230/460 |
15 hp |
11.1 kW |
|
Electrical Control Voltage |
120 VAC |
120 VAC |
| UL Labeled Panel
Box: Type NEMA 4, All Circuits Fused |
|
Standard 2 Button Controls: Keylock Start/ Mushroom Stop Connected to 13'
Sealtite |
|
Hydraulic Equipment |
| Hydraulic Pump
Capacity |
18.5 gpm |
70 L/min. |
|
Normal Pressure |
1650 psi |
114 bar |
| Maximum Pressure |
1950 psi |
134 bar |
|
Hydraulic Cylinder |
6" Bore x 4"
Rod |
152 mm x 102
mm |
| Reservoir Capacity |
30 gal. |
114 L |
|
Weight |
5700 lbs. |
2586 kg |
Pictures on
this page are illustrative only. Specifications are subject to change without
notice to accommodate improvements to the equipment. Certified in compliance
with ANSI Regulation Z245.2, all OSHA standards, and certified under WASTEC's
Stationary Compactor Certification Program. Products must be used with safe
practice and in accordance with said regulations and standards. |
|
Optional Features
Available
|
|
The
optional TrashMinder® is the most advanced method for reporting and measuring
container fullness as well as for managing user access and billing.
Click here for details.
Multi-cycle timer, dual controls, ozone odor control
system, security chutes, hoppers, cart dumpers and many
other options are also available as well as a full line
of compaction containers.
Visit our Options web pages
to choose from a wide range of steel and operational
options and accessories.
|