Stress Engineered
The Ram-Jet 225HD is specially
engineered for the really tough jobs in waste disposal, and that means the
strength is where it belongs... charge box floor features 1/2" steel plate over
four 4" steel channels... 1/2" ram face plate, backed with 10" channels that
incorporates T-1 plate in high stress areas... 3/8" ram top supported by 8 heavy
duty formed crossmembers... and heavily reinforced charge box sides.
Added Value Features
 Allen-Bradley
Motor Starter
TEFC (totally
enclosed fan cooled) motor
Quick Release Motor
Mount for easy servicing and maintenance
TRICON Fullness
Assurance System. This time shifting device eliminates all but one limit
switch. It also produces better compaction ratios by making the ram dwell
against the trash reducing the "memory" and springback. TRICON offers better
cold weather performance and extends the life of the machine.
Industrial & Recycling Applications
The RJ-225HD is ideally suited
for industrial applications such as the disposal of skids and cartons and for
recycling corrugated, aluminum and similar materials. Electrical components,
including the control box assembly, carry the UL Label. The 40 1/2" x 60" charge
box is 33" deep to make disposal fast and easy.
Ram Guide System
 The packing ram is supported by
specially formulated cast iron shoes which ride on replaceable wear strips. This
exclusive design protects the charge box floor from the full force of the
packing ram, extending its life and dramatically reducing compaction-robbing
friction. |
Side-Mount Power Unit
 Mark-Costello's Side-Mounted
Power Unit, the first in the industry, offers the convenience and
ease-of-maintenance of a remote power pack with the space savings of an
integrated power pack. This new configuration eliminates ALL electrical
components inside the compactor.
The Pump on Mark-Costello's high performance Side-Mounted Power Unit is
secured to a "C" flange TEFC motor with a machined bracket that guarantees
coupling alignment. The Limit Switch and all other parts of the power unit are
easily accessible for ease-of-maintenance. The Reset Button for the Motor
Starter is also located on the outside which eliminates entry into the control
box.
Advanced Control System
 The RJ-225HD features an
advanced, simplified control system with 2 button operation. It is key-operated
and fully automatic. The heavy duty push button controls are contained in a
weatherproof NEMA 13 enclosure. Connected to the power pack with 13' of
sealtite, the controls can be located for operator convenience.
 |
All of Mark-Costello's RamJet 225 Series Compactors are
Totally UL Listed! |
Click Here to compare Mark-Costello's 225 Series Compactors |
| Charge
Box Capacity |
|
|
|
[Mfrs. Rating] |
2.0 cy |
1.5 m3 |
| [WASTEC Rating] |
1.55 cy |
1.18 m3 |
|
Clear Top Opening |
40.5" X 60" |
1029mm x
1524mm |
|
Performance Data |
| Cycle Time |
48 s |
48 s |
|
Total Normal Force |
59,400 lb |
266 kN |
| Total Maximum Force |
67,900 lb |
304 kN |
|
Normal Ram Face Pressure |
34.1 psi |
235 kPa |
| Maximum Ram Face
Pressure |
39.0 psi |
268 kPa |
|
Ram Penetration |
14" |
356 mm |
|
Electrical Equipment |
| Electrical Motor
3/60-208/230/460 |
15 hp |
11.1 kW |
|
Electrical Control Voltage |
120 VAC |
120 VAC |
| UL Labeled Panel
Box: Type NEMA 3R, All Circuits Fused |
|
Standard 2 Button Controls: Keylock Start/ Mushroom Stop Connected to 13'
Sealtite |
|
Hydraulic Equipment |
| Hydraulic Pump
Capacity |
13 gpm |
49.2 L/min. |
|
Normal Pressure |
2100 psi |
14.5 mPa |
| Maximum Pressure |
2400 psi |
16.5 mPa |
|
Hydraulic Cylinder |
6" Bore x 2
1/2" Rod |
152 mm x 64 mm |
| Weight |
4840 lbs. |
2195 kg |
Pictures on this page are
illustrative only. Specifications are subject to change without notice to
accommodate improvements to the equipment. Certified in compliance with ANSI
Regulation Z245.2, all OSHA standards, and certified under WASTEC's Stationary
Compactor Certification Program. Products must be used with safe practice and in
accordance with said regulations and standards. |
|
The
optional TrashMinder® is the most advanced method for reporting and measuring
container fullness as well as for managing user access and billing.
Click here for details.
Multi-cycle timer, dual controls, ozone odor control
system, security chutes, hoppers, cart dumpers and many
other options are also available as well as a full line
of compaction containers.
Visit our Options web pages
to choose from a wide range of steel and operational
options and accessories.
|
