|
TC-3
HD |
TC-2
HD/HF |
| Charge Box Capacity |
|
|
| (Mfrs. Rating) |
3 cy |
2.2m3 |
3 cy |
2.2m3 |
| (WASTEC Rating) |
2.55 cy |
1.9m3 |
2.55 cy |
1.9m3 |
| Clear Top Opening(LxW) |
67 1/2"x60" |
1346 x 1524mm |
67 1/2"x60" |
1346 x 1524mm |
| Capacity Per Hour |
119 cy |
89m3 |
119 cy |
89m3 |
| Performance
Data: |
| Cycle Time |
77 sec |
77 sec |
59 sec |
59 sec |
| Total Normal Force |
54,500 lbs |
243 kN |
62,700 lbs. |
279 kN |
| Normal Ram Face |
31.3 psi |
216 kPa |
36.0 psi |
248 kPa |
| Ram Penetration |
13" |
330mm |
13" |
330mm |
| Electrical
Equipment |
| Electrical Motor 3/60-208/230/460 |
10 hp |
7.5 kw |
15 hp |
11 kw |
| Electrical Control Voltage |
120 VAC |
120 VAC |
120 VAC |
120 VAC |
| Typical Panel Box: UL Listed;
NEMA Type 3R with Standard Controls: Keylock Start, Stop, Reverse UL Listed;
NEMA Type 3R with Standard Controls: Keylock Start, Stop, Reverse |
| Hydraulic
Equipment |
| Pump Capacity |
10 gpm |
38 l/m |
13 gpm |
49 l/m |
| Normal Pressure |
2000 psi |
13.8 mPa |
2300 psi |
15.8 mPa |
| Hydraulic Cylinders |
|
|
|
|
Cylinder Bore
2 @ |
4 1/2" |
114 mm |
4 1/2" |
114 mm |
Cylinder Rod
2 @ |
2 1/2" |
63 mm |
2 1/2" |
63 mm |
| Structural
Characteristics |
| Charge Box Sides |
1/4" |
6 mm |
1/4" |
6 mm |
| Charge Box Floor |
1/2" |
13 mm |
1/2" |
13 mm |
| Ram Face Plate |
1/2" |
13 mm |
1/2" |
13 mm |
| Ram Bottom |
3/8" |
10 mm |
3/8" |
10 mm |
| Ram Top |
3/8" |
10 mm |
3/8" |
10 mm |
| Breaker Bar - Structural Angle |
6" x 8" x 1" |
150x200x25 mm |
6" x 8" x 1" |
150x200x25 mm |
| Weight |
5,000 lbs. |
2268 kg |
5,000 lbs. |
2268 kg |
Pictures on this page are illustrative
only. Specifications are subject to change without notice to accommodate
improvements to the equipment. Certified in compliance with ANSI Regulation
Z245.2, all OSHA standards, and certified under WASTEC's Stationary Compactor
Certification Program. Products must be used with safe practice and in accordance
with said regulations and standards.
Updated: September 2000 |
