|
TC-2
HD |
TC-2
HD/HF |
| Charge Box Capacity |
|
|
|
|
| (Mfrs. Rating) |
2 cy |
1.5m3 |
2 cy |
1.5 m3 |
| (WASTEC Rating) |
1.57 cy |
1.2m3 |
1.57 cy |
1.2 m3 |
| Clear Top Opening(LxW) |
41"x60" |
1715 x 1524 mm |
41"x60" |
1715 x 1524 mm |
| Capacity Per Hour |
109 cy |
83 m3 |
141 cy |
108 m3 |
| Performance
Data: |
| Cycle Time |
52 sec |
52 sec |
40 sec |
40 sec |
| Total Normal Force |
54,500 lbs |
243 kN |
62,700 lbs. |
279 kN |
| Normal Ram Face |
31.3 psi |
216 kPa |
36.0 psi |
248 kPa |
| Ram Penetration |
14" |
356 mm |
14" |
356mm |
| Electrical
Equipment |
| Electrical Motor 3/60-208/230/460 |
10 hp |
7.5 kw |
15 hp |
11 kw |
| Electrical Control Voltage |
120 VAC |
120 VAC |
120 VAC |
120 VAC |
| Typical Panel Box: UL Listed;
NEMA Type 3R with Standard Controls: Keylock Start, Stop, Reverse |
| Hydraulic
Equipment |
| Pump Capacity |
10 gpm |
38 l/m |
13 gpm |
49 l/m |
| Normal Pressure |
2000 psi |
138 bar |
2300 psi |
158 bar |
| Hydraulic Cylinder (2) |
|
|
|
|
Bore |
4 1/2" |
114 mm |
4 1/2" |
114 mm |
Rod |
2 1/2" |
63 mm |
2 1/2" |
63 mm |
| Structural
Characteristics |
| Charge Box Sides |
1/4" |
6 mm |
1/4" |
6 mm |
| Charge Box Floor |
1/2" |
13 mm |
1/2" |
13 mm |
| Ram Face Plate |
1/2" |
13 mm |
1/2" |
13 mm |
| Ram Bottom |
3/8" |
10 mm |
3/8" |
10 mm |
| Ram Top |
3/8" |
10 mm |
3/8" |
10 mm |
| Breaker Bar - Structural Angle |
6" x 8" x 1" |
150x200x25 mm |
6" x 8" x 1" |
150x200x25 mm |
| WEIGHT |
5,700 lbs. |
2585 kg |
5,700 lbs. |
2585 kg |
Pictures on this page are illustrative
only. Specifications are subject to change without notice to accommodate
improvements to the equipment. Certified in compliance with ANSI Regulation
Z245.2, all OSHA standards, and certified under WASTEC's Stationary Compactor
Certification Program. Products must be used with safe practice and in accordance
with said regulations and standards.
Updated: September 2000 |
