| Specifications |
| Main Frame: |
10" x 4 x 1/2" rectangular tubing ASTM A-500 Grade C with replaceable 3" x 1/2" durability strips on top of main rail |
| Reeving & Lift Cylinders: |
Interchangeable; double acting 6" bore with 79" stroke, 4 1/2" OD chrome cylinder rod; 3" OD mounting shafts |
| Cable Sheaves: |
10" x 2 1/2" CRS shaft with greaseless bushings; all 5 sheaves are interchangeable with replaceable end pins |
| Reeving Sheave Blocks: |
Nylon shoes reduce wear |
| Reeving Cylinder Rod Covers: |
Bolt-on solid steel covers for
ease-of-maintenance |
| Cable: |
180 models – 7/8" x 74 ft. EXIWRC regular right lay |
| Cable: |
200 models – 7/8" x 78 ft. EXIWRC regular right lay |
| Cable Pick-Up End: |
Oval eye steel casting |
| Cable Anchor: |
7/8" U-bolt clamps (4) |
| Side Rollers: |
Interchangeable & greaseless;
4" OD x 4" wide with 2" shaft; easily replaceable with bolt-on
mounting |
| Rear Ground Roller: |
6 5/8" OD x 24 1/4"; easily replaceable with bolt-on mounting |
| Container Guides: |
Ramp type container guides on
all rollers. |
| Front Container Stops: |
Front container stops: 1 1/2"
steel plate welded into main rails |
| Front Container Locks: |
Automatic rotating 1" steel
plate no springs required; patent pending |
| Rear Container Hold-Down: |
Strap & ratchet with 1"
steel plate hook |
| Fold-Up Bumper: |
Automatically folds-up as hoist
is raised; can be pinned-up to accommodate trailers |
| Rear Hinge: |
Low mount for greater stability;
1/2" reinforced steel plate with 2 1/2" CR steel solid through
shaft |
| Fenders: |
Poly or steel one-piece; spring
or shock mounted |
| Hydraulic Pump: |
Muncie PL-27 direct mount to PTO (when possible) 36 gpm@1400 rpm |
| Valve: |
2 spool standard; 3 spool on
EX model; air controls standard in cab |
| Filters: |
10 micron return line, 100 mesh
suction strainer, 10 micron air breather |
| Ball Valve: |
1 1/2" |
| Hydraulic Reservoir: |
Three-way filtering system;
50 gallon reservoir; 2 top mounted clean-outs |
| Operating Pressure: |
2500 psi |
| Site Gauge: |
Window with temperature gauge |
| Hydraulic Fittings: |
Pipe thread with weld-on fittings |
| Standard Extras: |
Air controls; 48" tool
box; in-cab hoist up alarm; 97 dec. back-up alarm, tandem steel or poly
fenders |
