| Gemini-Xtreme Specifications: |
 |
| Structural Dimensions: | |
| Body Sides |
3/8" (9.55mm)
|
| Body Floor |
1/2" (with 3/8" ASTM 400 brinell liner, and 1/2" ASTM 400 brinell tongue & groove bars.
|
| Body Side & Floor Reinforcement |
Heavy structural tubing and angle
|
| Bale Chamber Top & Bottom |
Heavy wall 8x3 rectangular tubing, with 3/8" liners
|
| Shear Blade |
4140 cold drawn tool steel, bolt-on, adjustable & reversible
|
| Ram Hold-Down System |
Adjustable cold roll bar assembly with integrated heavy-duty drag plate (adjust as hold-downs are adjusted)
|
| Ram Top |
1/2" thick A-514 plate (integrated shearing edge)
|
| Ram Bottom |
1/2" thick with 1/2" ASTM 400 brinell tongue & groove plates/liners
|
| Ram Sides |
1/2" steel with nylon wear pads at rear corners
|
| Ram Face |
1" heavily reinforced plate
|
| Hydraulic/Electrical Specifications: | |
| Power Unit | 20 HP (15kW) |
| Control Voltage | 460 VAC, 3 Phase (UL Listed Control Panel) |
| Programmable Controller | Standard |
| Pump | 34 gpm (4000 psi rated) (129 L/min.) |
| Cylinder Bore (2) | 6" (152mm) |
| Cylinder Rod (2) | 4" (102mm) |
| Cylinder Stroke | 57" (1448mm) |
| Oil Reservoir | 100 gal. capacity (379 liters) |
| Performance Data: | |
| Standard Operating Pressure | 3000 psi. (20.6 MPa) |
| Platen Force (overall) | 147,300 (655 kN) |
| Platen Force - PSI | 81.8 psi (564 kPa) |
| Cycle Time | 34 Seconds |
| Nominal Bale Size | 30"H x 48"L x 60"W (762mm x 1219mm x 1524mm) |
| Bale Weight (OCC) | Up to 1400 lbs. (635 kg) |
| Baler Weight | 17,500 lbs. (7938 kg) |